I don’t know about you, but I enjoy a good bath or shower a lot and one of the worst things that you can notice while you’re in the bathroom is mold starting to grow on the ceiling or on the wall. It appears as a splotchy growth that’s slowly creeping its way from one end of the room to the other and if you leave it untreated, it will cover your entire bathroom. You can scrub it off the walls with mold and mildew cleaner all you want to, but in the end if the infection has spread so far, you will probably have to replace the sheetrock in the bathroom. Sheetrock (or drywall) is a porous surface and mold cannot be effectively removed from it by surface cleaning. The mold will infect the entire depth of the board and most of the time there is not anything that you can do except throw it away and replace it.
Something that has been popular in the past and even in a few homes now is putting carpet in the bathroom. This is a very bad idea, because no matter how careful you might be, your toilet, sink, or bathtub is going to overflow eventually and leave you with a mess of soaked carpet and padding. Carpet needs to be dried as soon as possible when it comes into contact with water. Once the water dries naturally, the carpet will smell, especially if you are unlucky enough to have to live with only well water.
If you live in an older home and your bathroom does not have a vent to release the hot air and steam outside so that it does not attach itself to the sheetrock and become absorbed by it. This is a worthy investment to make and it should not cost more than $50 to $70 and maybe half a day of time to install if you do it yourself.
Whatever you do, do not leave damp towels, rags, or clothing in the bathroom closet or on the floor, especially if you have carpet in the bathroom. Your best bet is to use a plastic laundry hamper and put the dirty laundry in that and only in that so that even if the clothes do become moldy, it is not likely to infect the floor or the wall because of the plastic barrier.
Showing posts with label bathroom. Show all posts
Showing posts with label bathroom. Show all posts
Saturday, January 26, 2008
Here’s How To Stop Water Damage
One of the last things that any homeowner wants to have to do is completely renovate their bathroom or kitchen due to water damage and mold growth, but it happens all the time. It does not have to happen to you, though, as long as you know how to maintain these two rooms properly. They require a lot of daily maintenance to keep in top shape, but it is not the kind of difficult maintenance that you might think. Most of it is just a light cleaning up or casual inspection.
Inspect the floor of the room first. This is what supports everything else, so the integrity of this structure is paramount to the integrity of the entire room. If this goes, so will the rest of it. Try bouncing up and down a little on your toes and see if the room shakes. If it does or if the floor feels weak at all, you may have a water damage problem on your hands. You can also inspect for water damaged floors by looking at the tile and seeing if it is cracked at all. If you have a vinyl floor, looking for cracks in this can also help. Grout or caulking around the room should not be missing or loose at all.
The ceiling in both the kitchen and the bathroom is also at risk, although most kitchens come with a range hood with an exhaust fan built into it that will remove the steam from the room. The bathroom should come with one, as well, but if you live in an older home that has a bathroom in the center of the house, you may not have an exhaust vent already installed. These are installed by standard procedure now, especially in bathrooms that do not have windows, as a part of most building codes.
Make sure that the cabinets underneath the sinks in both of these rooms are covered in a laminate material to keep any dripping pipes from rotting the wood and causing you to have to replace that, too.
Spills of water in the kitchen and bathroom can be somewhat controlled by using rugs to help absorb some of the water. Most homes like to have rugs in these rooms, anyway, but many do not realize that they have a practical application other than just feeling good under bare feet and looking pretty.
Inspect the floor of the room first. This is what supports everything else, so the integrity of this structure is paramount to the integrity of the entire room. If this goes, so will the rest of it. Try bouncing up and down a little on your toes and see if the room shakes. If it does or if the floor feels weak at all, you may have a water damage problem on your hands. You can also inspect for water damaged floors by looking at the tile and seeing if it is cracked at all. If you have a vinyl floor, looking for cracks in this can also help. Grout or caulking around the room should not be missing or loose at all.
The ceiling in both the kitchen and the bathroom is also at risk, although most kitchens come with a range hood with an exhaust fan built into it that will remove the steam from the room. The bathroom should come with one, as well, but if you live in an older home that has a bathroom in the center of the house, you may not have an exhaust vent already installed. These are installed by standard procedure now, especially in bathrooms that do not have windows, as a part of most building codes.
Make sure that the cabinets underneath the sinks in both of these rooms are covered in a laminate material to keep any dripping pipes from rotting the wood and causing you to have to replace that, too.
Spills of water in the kitchen and bathroom can be somewhat controlled by using rugs to help absorb some of the water. Most homes like to have rugs in these rooms, anyway, but many do not realize that they have a practical application other than just feeling good under bare feet and looking pretty.
Subscribe to:
Posts (Atom)
